Component Leak Detection Systems

The systems required to test the hermetic seal of integrated circuits and microelectronic devices consist of a pressurization unit and a leak detection system. Trio-Tech offers several different types of pressurization systems and leak detection systems for both fine and gross leak testing. These systems meet or exceed military test requirements.

G-400 Pressurization Unit

The G-400 is a Fine and Gross leak pressurization system that is compatible with both helium and fluorocarbons. This preconditioning system is designed to automatically pressurize test samples with helium or fluorocarbons.

Upon completion of the preconditioning phase, the test sample is placed inside a "bubble tester" for gross leak testing. When detecting fine leaks a helium mass spectrometer is used.


G-254A Bubble Tester

The bubble tester is designed to meet the MIL-STD-883 requirements for gross leak testing. The G-254A bubble tester is a medium sized system providing a usable tray area of 5-7/8" x 13-7/8". Other standard models are available for smaller and larger capacity requirements.







C-103-006 CENTRISAFE CENTRIFUGE (HIGH SPEED)



The C-103 series centrifuge is a high speed centrifuge designed for continuous duty centrifugal acceleration. This system has been constructed to satisfy MIL spec testing in both directions of the X,Y and Z axis. Over 2500 rotors and inserts are available to provide complete turn-key systems.





Click here to return to the products page.